Shearing & Delivery
Slitting · Cut-to-Length · Just-in-Time Delivery
What We Do
Not coil, but blanks cut to a drawing, at the line side, on the day the schedule says.
Customers do not buy coil.They buy blanks cut to a drawing, at the line side, on the day the schedule says.
The middle step: slit to width, cut to length, level, and ship on the daily call-off.Two slitting lines and one high-speed cut-to-length line, plus its own fleet.
East China is same-day or next-day.Every lot ships with a mill certificate, and the heat number traces back to the mother coil.
Tolerances tighter than the standard table are stated at the enquiry stage.Better to decline than to ship blanks a press rejects.
Cut length held to ±0.5 mm.
Mill certificate and heat number in every lot.
Shipped on the daily call-off plan.
Processing Capabilities
The figures asked about most; anything outside these ranges is a separate enquiry.
| Item | Range / value | Unit | Note |
|---|---|---|---|
| Applicable materials | 冷轧、热轧、镀锌、酸洗、不锈钢 | — | Grade as per your drawing |
| Thickness range | 0.3 – 6.0 * | mm | Upper limit depends on steel strength |
| Slit width | 20 – 1,650 * | mm | Narrowest slit 20 mm |
| Cut length | 200 – 6,000 * | mm | Long lengths need advance scheduling |
| Cut length tolerance | ±0.5 * | mm | Measured within 1 m |
| Burr height | ≤ 0.05 * | mm | Standard tooling condition |
| Max coil weight | 25 * | t | Limited by crane and decoiler |
| Packaging | 木托 / 铁托 / 纸角+缠绕膜 | — | To your line requirement |
| Standard lead time | 24 – 72 * | 小时 | East China, subject to schedule |
| Minimum order | 3 * | 吨 | Multiple sizes combine |
Equipment and Lines
Machine condition and capacity decide the lead time, so the list is detailed.
How an Order Runs
From order to delivery, four steps, with no chasing required.
Confirm the order
We confirm grade, tolerance, quantity and address, then issue a processing order.
Schedule and slit
Scheduled against due date and tool condition; the batch starts after the first piece measures in.
Measure and label
Length, width and burr sampled; labeled and packed to your line requirement.
Pack and deliver
Own trucks on the daily plan; certificate and delivery note travel with the load.